1-Wire Weather Instrument Kit V3.0

1-Wire® Weather Instument Kit V3.0, contains all needed elements to convert your PC computer in to a profesional Weather Station. The TAI8515 lets you view the weather outside from the comfort of an armchair.

1-Wire Humidity Module

             The perfect companion for the TAI8515 Weather Instrument, the TAI8540D 1-Wire® Humidity Module can be installed on any existing 1-Wire® network. Based on the HIH-4000 humidity sensor, manufactured by Honeywell, and using the DS2438 IC from Dallas Semiconductors as a 1-Wire  front end and a A/D converter, the  TAI8540D not only permits to measure the relative humidity, but also the temperature.

            The unit obtains the power it needs directly from the 1-Wire® network, without any need for an external power supply.          

             As with all 1-Wire® devices, it comes with a unique 64 bit address,  so multiple units can be distinguished on complex networks.

The TAI8570 1-Wire pressure sensor allow you to measure the atmospheric pressure. The perfect companion for the TAI8515 Weather Instrument, the 1-Wire® Pressure Sensor can be installed on any existing 1-Wire® network. The unit obtains de power needed to operate directly from the 1-Wire® network, without need of an external power supply.

              Provided with an unique 64 bit address each unit can be identified on complex networks And several sensors can be installed on the same network for diferential pressure monitoring

The  TAI8520 Temperature Sensor module for indoor temperature measurement is a low cost device of easy installation that issues reports on surrounding temperature through a 1-Wire Network to a main computer.

The TAI8586KIT conversion kit  include all you need to convert a Davis rain gauge to operate on a 1-Wire network. Instruction manual of how this can be done can be downloaded  in PDF format here.

This same kit can be used to modify any tipping based rain gauge

You can download the TAI8586 Datasheet in pdf format here.

Based on the La Crosse Technology WS-7047U Wired Rain Meter, the TAI8575B is the perfect companion for the TAI8515 1-Wire weather Station

Features

• Fully 1-Wire compatible
• Li battery backup for the 1-Wire counter
• Measures 1/100th of an inch per tip
• Rainfall Sensor Self-Empties Via Tilting Cups
• Actual Size: 4.5" x 3.5" x 2"

 

 

6 Channel 1-Wire HUB

The DS9490R is a USB bridge with 1-Wire RJ11 interface to accommodate 1-Wire receptacles and networks. The DS1402D-DR8 (Blue Dot™) can readily be used in conjunction with the DS9490R to create an iButton PC reader. The DS9490 can be used with the 1-Wire Weather Instrument and with any of the 1-Wire modules offered by AAG Alectronica LLC. The adapters is based on the DS2490 USB to 1-Wire bridge chip. PC software drivers for Windows ® 98, Windows 2000, Windows ME, and Windows XP can be found on the iButton website

Features

• True-ground interface to an RS232 COM Port for reading and writing 1-Wire devices
• Works with bipolar as well as unipolar logic signals
• Compatible to COM ports (±)6V to (±)12V
• Supports reading and writing at regular and Overdrive speeds
• Provides strong pull-up to 5V for Temperature, Crypto and EEPROM 1-Wire devices
• Programs 1-Wire EPROM devices (with external 12V power supply only)
• Communicates at data rates of 9.6 (default), 9.2, 57.6 and 115.2 kbits/