Its unique address permits it to be individualy identified, selected  and controlled within a 1-Wire network.

In addition to the relay output the module has a separate input that can be used as an independent input or as a feedback input for the controlled device. .

The 0V to 12V input range of this input is protected by a series diode.

The connect to the controlled relay  is via wire conectors.

Optionally, the device can include a DS18S20 or a DS2505 EPROM memory in which the parameters of the module are stored using the TAG-ID  and TAG-XML specification

By choosing TB or TS versions, a DS18X20 temperature is included in the module. A DS18B20 for the TB option and a DS18S20 in case of the TS version respectively. For further information regarding the DS2406 or the TAG-ID standard, visit www.dalsemi.com